KCD2-SCD-EX1-P+F倍加福安全栅库存*销售_—中国食品机械设备供应网

产品详情

P+F倍加福安全栅库存*销售

一般特性
Signal type		模拟量输出
供电
连接器		Power Rail or terminals 9+, 10-
额定电压		19 ... 30 V DC
纹波		≤ 10 %
额定电流		≤ 30 mA
功耗		≤ 600 mW
功耗		≤ 700 mW
输入
连接器		terminals 5-, 6+
输入信号		4 ... 20 mA limited to approx. 30 mA
电压降		depending on switch configuration open loop voltage of the control system < 23 V: approx. 6 V at 20 mA open loop voltage of the control system < 27 V: approx. 10 V at 20 mA
输入电阻		> 100 kΩ, with field wiring open
输出
连接器		端子 1+,2-
电流		4 ... 20 mA
负载		0 ... 650 Ω
电压		≥ 13 V at 20 mA
纹波		20 mV _rms
Transfer characteristics
偏差		at 20 °C (68 °F), 0/4 ... 20 mA ≤ ± 0.1 % incl. non-linearity and hysteresis
频率范围		field side into the control side: bandwidth with 0.5 V_pp signal 0 ... 3 kHz (-3 dB) control side into the field side: bandwidth with 0.5 V_pp signal 0 ... 3 kHz (-3 dB)
上升时间		10 to 90 % ≤ 100 ms
指令符合
电磁兼容性
	Directive 2004/108/EC	EN 61326-1:2006
Conformity
电磁兼容性		NE 21
防护等级		IEC 60529
周围环境
环境温度		-20 ... 60 °C (-4 ... 140 °F)
机械特性
防护等级		IP20
重量		approx. 100 g
外形尺寸		12.5 x 114 x 124 mm (0.5 x 4.5 x 4.9 in) , housing type A2
安装		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with Ex-areas
EC-类型鉴定证书		CESI 06 ATEX 021 , for additional certificates see www.pepperl-fuchs。。ｃｏｍ
	保护型号、类别、组别	II (1)G [Ex ia Ga] IIC , II (1)D [Ex ia Da] IIIC , I (M1) [Ex ia Ma] I
符合标准		PF 06 CERT 0973 X
	Group, category, type of protection, temperature class	II 3G Ex nA IIC T4 Gc
指令符合
	94/9/EC 指令	EN 60079-0:2009, EN 60079-11:2007 , EN 60079-15:2005 , EN 60079-26:2007 , EN 61241-11:2006 , EN 50303:2000
International approvals
FM认证
	控制图	16-533FM-12 (cFMus)
UL认证
	控制图	16-533FM-12 (cULus)
IECEx approval		IECEx CES 06.0001
	Approved for	[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I