KFD2-UT2-EX1-P+F倍加福安全栅库存*销售_—中国食品机械设备供应网

产品详情

P+F倍加福安全栅库存*销售

一般特性
Signal type		Analog input
供电
连接器		terminals 14+, 15- or power feed module/Power Rail
额定电压		20 ... 30 V DC
纹波		在电源容限内
Power loss/power consumption		≤ 0.98 W / 0.98 W
输入
连接器		terminals 1, 2, 3, 4
RTD		type Pt10, Pt50, Pt100, Pt500, Pt1000 (EN 60751: 1995) type Pt10GOST, Pt50GOST, Pt100GOST, Pt500GOST, Pt1000GOST (6651-94) type Cu10, Cu50, Cu100 (P50353-92) type Ni100 (DIN 43760)
	Measuring current	approx. 200 μA with RTD
	Types of measuring	2-, 3-, 4-wire connection
	Lead resistance	max. 50 Ω per lead
	Measuring circuit monitoring	sensor breakage, sensor short-circuit
Thermocouples		type B, E, J, K, N, R, S, T (IEC 584-1: 1995) type L (DIN 43710: 1985) type TXK, TXKH, TXA (P8.585-2001)
	Cold junction compensation	external and internal
	Measuring circuit monitoring	sensor breakage
电压		selectable within the range -100 ... 100 mV
电位器		0 ... 20 kΩ (2-wire connection), 0.8 ... 20 kΩ (3-wire connection)
输入电阻		≥ 1 MΩ (-100 ... 100 mV)
输出
连接器		output I: terminal 7: source (-), sink (+), terminal 8: source (+), terminal 9: sink(-)
输出		模拟量电流输出
	电流范围	0 ... 20 mA or 4 ... 20 mA
	错误信号	downscale 0 or 2 mA, upscale 21.5 mA (acc. NAMUR NE43)
	Source	load 0 ... 550 Ω open-circuit voltage ≤ 18 V
	Sink	Voltage across terminals 5 ... 30 V. If the current is supplied from a source > 16.5 V, series resistance of ≥ (V - 16.5)/0.0215 Ω is needed, where V is the source voltage. The maximum value of the resistance is (V - 5)/0.0215 Ω.
Transfer characteristics
反应时间		worst case value (sensor breakage and/or sensor short circuit detection enabled) mV: 1 s, thermocouples with CJC: 1.1 s, thermocouples with fixed reference temperature: 1.1 s, 3- or 4-wire RTD: 920 ms, 2-wire RTD: 800 ms, Potentiometer: 2.05 s
P+F倍加福安全栅库存*销售指令符合
电磁兼容性
	Directive 2004/108/EC	EN 61326-1:2006
Conformity
电磁兼容性		NE 21:2006
防护等级		IEC 60529:2001
周围环境
环境温度		-20 ... 60 °C (-4 ... 140 °F)
机械特性
防护等级		IP20
重量		approx. 130 g
外形尺寸		20 x 119 x 115 mm (0.8 x 4.7 x 4.5 in) , housing type B2
安装		on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with Ex-areas
EC-类型鉴定证书		CESI 04 ATEX 143 , for additional certificates see www.pepperl-fuchs。。ｃｏｍ
	保护型号、类别、组别	II (1)GD, I (M1), [Ex ia] IIC, [Ex iaD], [Ex ia] I (-20 °C ≤ T_amb ≤ 60 °C) [circuit(s) in zone 0/1/2]
符合标准		TüV 02 ATEX 1797 X , observe statement of conformity
	Group, category, type of protection, temperature class	II 3G Ex nA II T4 [device in zone 2]
指令符合
	94/9/EC 指令	EN 60079-0:2012 EN 60079-11:2012 EN 60079-15:2010 EN 60079-26:2007 EN 50303:2000
International approvals
UL认证
	控制图	116-0316
CSA 认证
	控制图	366-024CS-12 (cCSAus)
IECEx approval		IECEx TUN 07.0003
	Approved for	[Zone 0] [Ex ia] IIC, [Ex iaD], [Ex ia] I